Liquid Metallic Shimmer Chiffon Fabric

Prepare this 90 GSM, 150 cm wide, non-stretch metallic chiffon as a delicate woven sheer. Test the actual color before sewing; metallic yarns and fine chiffon can be sensitive to snagging, seam tension, prolonged wetting and high heat.

• Inspect Compare the face and reverse under daylight and directional light; check how the metallic yarn appears over your intended lining.
• Cut Support the whole width on a clean cutting table, use weights or fine pins, and cut consistently with the grain or tested bias layout.
• Needle Try a fresh 60/8 or 70/10 Microtex/sharp needle with fine polyester thread. Test stitch length, machine tension and presser-foot pressure on an offcut.
• Seams Try narrow French seams or another fine enclosed finish; compare with a narrow rolled or baby hem to protect the fine metallic edges.
• Wash Test a swatch before cleaning. Gently hand wash in cold water (up to 30°C) with a mild detergent if the yarn and color remain stable; do not scrub, bleach, soak for long, wring or machine-spin. For elaborate garments, consult a professional cleaner and confirm that the full fabric-and-trim combination is safe for the proposed process.
• Dry Do not tumble dry. Blot excess water between clean towels without twisting, then reshape and air dry flat or on a well-supported hanger in the shade. Keep away from direct sun, radiators and other strong heat sources.
• Iron Avoid ironing when possible. If necessary, press briefly from the reverse at the lowest effective temperature, using a clean pressing cloth and light pressure. Never touch the metallic face directly with a hot iron; test temperature and steam on a swatch first.

Test washing, drying and pressing on a swatch before treating full yardage. Advice is precautionary and should be adapted to the final garment construction.