Textured Shimmer Plisse Fabric
Textured Shimmer Plisse Fabric is a South Korea-made lightweight fashion fabric crafted from 100% metallic polyester with a luminous pleated surface. At approximately 90 GSM and 150 cm wide, it is sheer, fluid and non-stretch, making it especially suited to layered eveningwear and statement garments where texture, movement and light reflection are central to the design.
The collection is offered in three distinct surface styles: Plisse, Leaf Plisse and Mini Plisse. Each pleating pattern changes the way the metallic shimmer catches light, from clean regular folds to sculpted leaf-like texture and finer micro-pleats. The result is a dimensional surface that gains depth as the fabric moves, drapes and folds.
Because the fabric is lightweight and sheer, it works particularly well for pleated skirts, evening gowns, cocktail dresses, blouses, statement tops, wide-leg trousers, overlays, cape details and stage or performance pieces. A lining or underlayer can be added when more coverage is required. The fabric itself is non-stretch, so fitted patterns should be drafted with appropriate ease rather than relying on stretch recovery.
- Composition: 100% Metallic Polyester
- Weight: 90 GSM — lightweight
- Width: 150 cm
- Structure: pleated
- Stretch: non-stretch
- Coverage: sheer
- Surface styles: Plisse, Leaf Plisse and Mini Plisse
- Finish: reflective metallic shimmer
- Drape: fluid
- Origin: South Korea
- Best for: evening gowns, cocktail dresses, skirts, blouses, statement tops, wide-leg trousers, overlays and stagewear
- Sold by: meter, swatch or wholesale
The pleated construction gives the fabric volume and visual movement without the bulk of heavier embellished textiles. For coordinated garments or production runs, order the required quantity together when possible and test a swatch before cutting or pressing, as metallic and pleated finishes can respond to heat and handling differently from plain polyester fabrics.
Product Specifications
Not sure how many meters?
Use our fabric estimator to calculate.
What buyers ask before ordering
What is the visual difference between Plisse, Leaf Plisse and Mini Plisse?
Plisse gives a regular linear pleat, Leaf Plisse creates a more sculpted organic surface, and Mini Plisse uses finer, tighter pleats. The different structures change how the shimmer breaks across the surface, so compare the close-up and draped photos before choosing.
How sheer will this 90 GSM fabric look in a finished garment?
At approximately 90 GSM the fabric is lightweight and sheer. For skirts, trousers, dresses or bodices where full coverage is needed, plan on a lining, slip or coordinated underlayer. Sheer sleeves, overlays and cape details can be left unlined when transparency is part of the design.
Does the plisse texture make the fabric stretchy even though it is listed as non-stretch?
The pleats can open slightly as the fabric moves, but that should not be treated as true stretch or recovery. Draft fitted garments with appropriate ease and do not size a pattern as though this were a stretch jersey.
Which pleat style is best when I want the strongest surface texture?
Leaf Plisse gives the most sculpted, directional texture, while Mini Plisse reads finer and more compact. Classic Plisse gives the cleanest regular pleated look. The preferred effect depends on how much texture you want visible from a distance.
Can I use this fabric for wide-leg trousers or palazzo pants?
Yes. Its light weight and fluid drape suit wide-leg silhouettes, but the sheer construction usually benefits from lining or an underlayer. Allow enough ease because the fabric itself is non-stretch.
Will the shimmer look the same when the pleats are opened and compressed?
No. The reflective surface changes as the pleats expand, compress and change angle to the light. This is part of the fabric's visual character and is especially noticeable in movement, photography and stage lighting.
Do I need to keep all pattern pieces facing the same pleat direction?
For the most consistent result, keep major pieces aligned to the same pleat and visual direction. Rotating a piece can change both the surface rhythm and how the metallic shimmer reflects light.
Is this suitable for sheer sleeves, cape panels or layered overlays?
Yes. The 90 GSM weight and fluid drape make it particularly useful for sleeves, capes, overskirts and layered panels where you want visible movement without the bulk of a heavier embellished fabric.
Can I gather or ruche a fabric that is already plissed?
Yes, but gathering stacks the existing pleats and can create extra volume at the seam. Test a small sample first and reduce unnecessary bulk in seam allowances before committing to the full garment.
How should I hem the fabric without flattening the pleats?
Test the exact colour and pleat style first. A narrow rolled hem, fine overlocked edge or carefully hand-finished hem may work depending on the edge behaviour. Avoid pressing the hem flat with an iron because heat and pressure can disturb the plisse texture.
Can I use fusible interfacing on collars, waistbands or facings?
Use caution with heat-activated fusibles because the heat and pressure needed to bond them may affect the pleats or metallic surface. Test on an offcut first, or consider a lightweight sew-in stabiliser where appropriate.
Should I cut the fabric while the pleats are stretched open?
No. Let the fabric rest in its natural pleated state and avoid pulling it open while laying out the pattern. For precision, test the pattern on a small section and cut single layer when the pleat direction or surface motif needs close control.
What should I check before ordering fabric for a skirt or dress with a lot of fullness?
Check the physical width, the way the selected pleat style expands, the transparency, and how much gathering or flare your pattern requires. Pleated fabrics can consume yardage differently from flat fabrics, so use the pattern requirements as the starting point and allow extra for layout tests.
How should unused fabric be stored so the pleats stay defined?
Keep it clean, dry and away from heat. Loosely roll or fold it along the direction of the pleats without heavy compression, and avoid storing it under heavy objects that could crush the texture for long periods.
Is this better for a fitted bodycon dress or for a flowing silhouette?
It is better suited to flowing, layered or ease-based silhouettes because it is lightweight, sheer and non-stretch. A fitted bodycon design normally benefits from a fabric with true stretch and recovery.
Before cutting this 90 GSM non-stretch shimmer plissé, test the selected colour and pleat style for edge behaviour, stitching and seam bulk. Work with the fabric in its natural pleated state rather than stretching the pleats flat.
- Wash Hand wash cold, maximum 30°C, with minimal agitation and a small amount of mild detergent. Do not scrub, twist or wring the pleated metallic surface.
- Dry Do not tumble dry. Gently remove excess water without twisting, then air dry in the shade while allowing the pleats to fall naturally. Keep away from radiators and direct heat.
- Iron Do not iron or press directly on the plissé surface. Heat and pressure can flatten the pleats. If needed, test very light steam from a distance on a swatch first without pressing the fabric.
- Rest first Let the fabric relax in its natural pleated state before measuring and cutting. Do not stretch the pleats open to force a flat width.
- Direction Keep major pattern pieces aligned in the same pleat direction so the texture and metallic reflection remain visually consistent.
- Needle Start with a fresh fine universal or Microtex needle around 70/10–80/12 and test on an offcut; change the setup if the metallic surface marks or stitches skip.
- Cutting Cut single layer when precise pleat placement matters, use sharp scissors or a rotary cutter, and handle the edges gently so the pleats are not pulled out of shape.
- Sewing Use fine polyester thread and test stitch length and tension first. Baste or control pleats near difficult seams instead of flattening them with heat.
- Hemming Test a narrow rolled hem, fine overlocked finish or hand-finished edge on a sample. The best method depends on whether the specific pleat style and colourway fray or curl at the cut edge.
- Pressing Avoid direct ironing. Finger-press seams where possible; if a construction step truly requires steam, test gentle steam from a distance on a scrap and avoid pressure on the pleats.
Preserve the pleated metallic structure by minimising heat, pressure and aggressive handling; test sewing and care methods on a swatch first.
Compare to Metallic Plisse Stretch Jersey
Both fabrics have a metallic pleated surface, but this fabric is much lighter, sheer and non-stretch rather than an opaque stretch jersey.
This fabric is better when
- Choose this fabric when you want a lighter, more translucent pleated look.
- Better for overlays, sheer sleeves, flowing skirts and layered eveningwear.
- Its 90 GSM construction creates less bulk in voluminous pleated silhouettes.
Metallic Plisse Stretch Jersey is better when
- Choose metallic plisse stretch jersey when a fitted garment needs true stretch and recovery.
- Better for body-skimming dresses, jumpsuits and movement-focused performance pieces that depend on stretch.
Compare to Pleated Satin
Pleated satin usually gives a smoother, more opaque formal surface, while this fabric is lighter, sheerer and more visibly shimmered.
This fabric is better when
- Better for airy overlays, translucent sleeves and light layered skirts.
- The metallic shimmer creates a stronger light-changing effect across the pleats.
- Three pleat structures offer more surface variation than a standard regular pleat.
Pleated Satin is better when
- Choose pleated satin when you want more opacity and a smoother classic formal finish.
- Better when the garment should rely less on lining or layering for coverage.
Compare to Shimmer Chiffon
Both can create lightweight evening layers, but shimmer chiffon has a flatter surface while this fabric carries permanent dimensional plissé texture.
This fabric is better when
- The pleats create built-in volume and texture without adding heavy embellishment.
- Better when the surface pattern itself should be a visible design feature.
- Creates more structured light-and-shadow changes as the garment moves.
Shimmer Chiffon is better when
- Choose shimmer chiffon for a flatter, softer surface and more conventional draping.
- Better when gathers, bias movement or a smooth sheer layer are more important than permanent pleat texture.
Shipping, Returns & Store Visits
How do shipping, duties, taxes, and delivery work?
HIBA Fabrics ships internationally to the USA, Canada, UK, Australia, UAE, Saudi Arabia, and many other destinations. Shipping options, estimated delivery times, duties, VAT, taxes, and any applicable import charges vary by destination and are displayed at checkout before payment where applicable.
Shipping & DeliveryWhat should I know before ordering cut fabric?
Because most fabric orders are cut to your requested length, they may be subject to special return conditions. Please review our returns policy before purchasing. If you are unsure about colour, texture, weight, drape, or suitability, we recommend ordering a swatch before placing a larger order.
Returns & RefundsNeed help choosing the right fabric?
Our team can assist with fabric selection, quantity estimates, colour matching, garment suitability, wholesale enquiries, and international delivery questions before you place your order.
Can I visit HIBA Fabrics in person?
HIBA Fabrics is based in Istanbul, Türkiye. Please contact us before visiting to confirm appointment availability, opening hours, location details, and fabric availability.
Store Locations
Continue your fabric journey
Helpful fabric guides, related collections, swatches, and wholesale options for choosing the right material.
More Dress & Fashion Fabrics
Browse similar fabrics from the same collection and compare colors, texture, weight, and use cases.
View collection Use caseFabrics for hijabs
Explore fabrics selected for drape, comfort, coverage, softness, and everyday modestwear styling.
Browse hijab fabrics Use caseFabrics for dresses
Find fabrics suitable for casual dresses, eveningwear, occasionwear, layered designs, and flowing silhouettes.
Browse dress fabrics SwatchesFabric swatches before ordering
Learn how HIBA swatches work, when to order one, and what to check before purchasing larger meter quantities.
Swatch & ordering help WholesaleWholesale fabric orders
Request custom pricing for larger meter quantities, boutique sourcing, production, or repeat fabric orders.
Wholesale inquiry Buying guideHow to buy fabric by the meter
Learn what to check before ordering fabric online, including width, GSM, drape, opacity, stretch, swatches, and quantity planning.
Read guide