Two-Tone Polyester Crepe Fabric
Two-Tone Polyester Crepe Fabric is made in South Korea from 100% polyester. A midweight woven crepe with subtle two-tone visual depth and a softly lustrous surface. It is 205 GSM, 150 cm wide and non-stretch.
Suitable for dresses, blouses, skirts, abayas, kaftans and flowing woven silhouettes. Choose patterns with appropriate wearing ease and closures rather than relying on elastic stretch. Check pale colours in the intended lighting and use lining where needed.
Fabric specifications
- Composition: 100% polyester; not silk
- Construction: Woven
- Weight: 205 GSM
- Width: 150 cm
- Fabric mass per metre: 308 g per metre (rounded from 307.5 g)
- Stretch: Non-stretch
- Coverage: Opaque per product specification; check a swatch under intended lighting
- Surface and finish: Soft sheen with subtle two-tone tonal effect
- Texture: Fine, subtly grained crepe surface with tonal depth
- Drape: Fluid
- Origin: South Korea
- Ordering: By the metre; swatch and wholesale enquiry available
Sewing and care
Check the actual usable width and pattern layout before ordering; size, garment length, sleeves, fullness and grain direction affect metre requirements. Keep directional surfaces consistently oriented. Test stitching and pressing on a scrap. Use low synthetic heat, a pressing cloth and reverse-side pressing where suitable.
Test a swatch for colourfastness, finish stability and shrinkage before laundering or cutting full quantities. Cool gentle washing, shaded air drying and low-temperature pressing are general starting points, not a verified mill-specific care label. Follow the finished garment label and account for trims and linings.
Product Specifications
Not sure how many meters?
Use our fabric estimator to calculate.
What buyers ask before ordering
What are the fabric specifications?
This South Korean 100% polyester woven fabric is 205 GSM, 150 cm wide and non-stretch. Fabric mass per metre is approximately 308 g.
Does the fabric stretch?
No. Use patterns designed for non-stretch woven fabric, with suitable ease and closures.
How much fabric should I order?
Use the pattern layout for the actual usable 150 cm width. Size, length, fullness, sleeves and grain direction affect metre requirements; estimate from your cutting plan.
Is the fabric opaque?
The product specification is opaque. Check a swatch, especially pale colours, under the intended lighting and decide whether lining is needed.
How should I care for it?
Test a swatch for colourfastness, shrinkage and finish stability. Cool gentle washing and low-heat reverse pressing are general starting points, not a verified mill care label; follow the finished garment instructions.
Is the two-tone effect a printed pattern?
The recorded feature is subtle tonal visual depth on a woven crepe surface, not a printed motif. Check the actual shade under the lighting in which the garment will be worn.
Why is the metre weight 308 g rather than 307.5 g?
205 GSM multiplied by 1.5 m width gives 307.5 g per linear metre. The shipping measurement is rounded to 308 g; this is not a second GSM specification.
Why can rotated panels look like different colours?
The softly lustrous tonal face can reflect light differently with orientation. Compare trial panels and keep major garment pieces consistently directed before cutting the full layout.
How can I keep tonal crepe from shifting while cutting?
Support the whole fabric on the table instead of letting it hang and pull the grain. Test a single-layer layout, sharp cutting tools and pins within seam allowances on a scrap before cutting the garment.
What should I test if seams pucker on this tonal crepe?
Use a fresh suitable needle and test thread tension, stitch length and feeding on a useful-sized scrap. Avoid pulling the cloth. Puckering has several causes, so change one setting at a time rather than assuming one universal fix.
Which needle should I start testing with?
Trial a sharp or Microtex/universal needle suitable for this 205 GSM polyester woven and the chosen thread. Check for skipped stitches, visible holes and puckering; the best size depends on the actual layers and machine.
How can I finish the cut edges neatly?
Test whether the actual cut edge frays, then choose an appropriate overlocked, enclosed or bound finish. Check seam bulk and appearance through the face before using the finish throughout the garment.
How do I avoid pressing marks on tonal crepe?
Start on a scrap at low synthetic heat, from the reverse and through a pressing cloth. Check the surface after cooling. Do not assume a high-temperature steam setting is safe or that shine can be restored after damage.
Will interfacing change the drape?
It can. Trial a lightweight compatible interfacing or a sew-in alternative on the actual cloth and compare the result. Check adhesion, strike-through, stiffness and heat effects before committing to collars, cuffs or waistbands.
How can I choose a shade reliably from the photos?
Use the named colour and its six photographs as a guide, but screens and lighting can change perceived colour. Check a physical swatch for the intended outfit and lighting; no exact screen-to-fabric colour match is guaranteed.
This midweight205 GSM,150 cm wide non-stretch woven crepe has a softly lustrous, tonal face. Use a swatch to confirm grain, layout, seam quality and pressing before cutting bulk fabric.
- Orientation Lay all major garment panels in a consistent direction so the two-tone highlight and shade appear coordinated under light.
- Cutting Check usable width, grain direction and any colour variation along the roll. Keep panels supported during laying out and cutting.
- Needle and stitch Start with a sharp or Microtex/universal needle appropriate for a midweight polyester woven; test seam puckering, tension and stitch length.
- Fit Use patterns for non-stretch woven fabric with suitable wearing ease and closures.
- Seam finishing Test the cut edge for fraying and choose an appropriate overlocked, bound or enclosed finish if required.
- Pressing Press from the reverse at low heat through a cloth and verify that the tonal sheen is not flattened or marked.
These are starting-point sewing practices, not guaranteed factory processing specifications.
Compare to Italian Silky Crepe Fabric
This product is 205 GSM and 150 cm wide; Italian Silky Crepe is recorded as 205 GSM and 150 cm wide. Compare actual samples for surface, hand and drape rather than assuming identical construction.
This fabric is better when
- Soft sheen with subtle two-tone tonal effect
Italian Silky Crepe Fabric is better when
- A different silky crepe surface and hand
Compare to Milano Matte Sandwashed Silky Fabric
Milano is recorded as 100 GSM, 150 cm wide and 100% silky polyamide. This product is 205 GSM, 150 cm wide and 100% polyester. They are different fabrics.
This fabric is better when
- Fine, subtly grained crepe surface with tonal depth
Milano Matte Sandwashed Silky Fabric is better when
- A lighter 100 GSM sandwashed polyamide option
Shipping, Returns & Store Visits
How do shipping, duties, taxes, and delivery work?
HIBA Fabrics ships internationally to the USA, Canada, UK, Australia, UAE, Saudi Arabia, and many other destinations. Shipping options, estimated delivery times, duties, VAT, taxes, and any applicable import charges vary by destination and are displayed at checkout before payment where applicable.
Shipping & DeliveryWhat should I know before ordering cut fabric?
Because most fabric orders are cut to your requested length, they may be subject to special return conditions. Please review our returns policy before purchasing. If you are unsure about colour, texture, weight, drape, or suitability, we recommend ordering a swatch before placing a larger order.
Returns & RefundsNeed help choosing the right fabric?
Our team can assist with fabric selection, quantity estimates, colour matching, garment suitability, wholesale enquiries, and international delivery questions before you place your order.
Can I visit HIBA Fabrics in person?
HIBA Fabrics is based in Istanbul, Türkiye. Please contact us before visiting to confirm appointment availability, opening hours, location details, and fabric availability.
Store Locations
Continue your fabric journey
Helpful fabric guides, related collections, swatches, and wholesale options for choosing the right material.
More Abaya Fabrics
Browse similar fabrics from the same collection and compare colors, texture, weight, and use cases.
View collection Use caseFabrics for hijabs
Explore fabrics selected for drape, comfort, coverage, softness, and everyday modestwear styling.
Browse hijab fabrics Use caseFabrics for dresses
Find fabrics suitable for casual dresses, eveningwear, occasionwear, layered designs, and flowing silhouettes.
Browse dress fabrics SwatchesFabric swatches before ordering
Learn how HIBA swatches work, when to order one, and what to check before purchasing larger meter quantities.
Swatch & ordering help WholesaleWholesale fabric orders
Request custom pricing for larger meter quantities, boutique sourcing, production, or repeat fabric orders.
Wholesale inquiry Buying guideHow to buy fabric by the meter
Learn what to check before ordering fabric online, including width, GSM, drape, opacity, stretch, swatches, and quantity planning.
Read guide