Short answer: For fine, densely woven or slick fabrics — satin, chiffon, metallic foils, silk-like polyamide — needle maker SCHMETZ recommends a Microtex (sharp) needle, in sizes from 60/8 (chiffon, the finest end of the chart) up to 90/14 for sequins, lamé and heavier coated fabrics. For stretch fabrics it recommends a Stretch needle (75/11 or 90/14), and for woven jacquard a Universal 80/12–100/16. Change the needle at the start of every project: the sharp point of a Microtex is more sensitive to damage than a rounded point, and on satin a pulled thread cannot be hidden.
How to read a needle size
A needle labelled 70/10 is metric size 70 (the shaft is about 0.70 mm across) and American size 10. Lower numbers are finer. SCHMETZ lists Microtex needles in 60/8, 70/10, 80/12, 90/14, 100/16 and 110/18. (The shaft-diameter explanation is standard needle-sizing convention rather than a quote from the sources below.)
What the Microtex needle is for
SCHMETZ describes the Microtex as having a "slim acute point" for accurate stitching in very fine or densely woven materials. Its listed uses include chiffon, lamé, foils, microfibre, silk, sequined fabrics, taffeta and synthetic leather. SCHMETZ also notes that acute points are more sensitive than rounded or ball points, so you should "check the needle for damage more frequently and replace it in good time", and that for highly elastic knits a Stretch or Super Stretch needle is the better choice.
Fabric-by-fabric chart (SCHMETZ guidance, matched to HIBA fabrics)
| Fabric type | SCHMETZ recommendation | HIBA Fabrics examples |
|---|---|---|
| Satin | Microtex, Jeans or Universal "depending on fabric weight" (no single size given) | 110 GSM polyester satin; 220 GSM satin |
| Chiffon | Universal or Microtex 60/8–70/10 | 80 GSM polyamide chiffon, 2-way stretch; 90 GSM metallic chiffon |
| Foils | Microtex 60/8–110/18 | Rainbow iridescent foil |
| Lamé / metallic | Microtex 60/8–90/14 | Lurex-style metallic |
| Nylon (polyamide family) | Universal or Microtex 60/8–90/14 | the 100% silky polyamide foils and metallics above |
| Sequined fabric | Microtex 70/10–90/14 or Stretch 75/11, 90/14 | Metallic foil sequin |
| Tulle | Universal or Jersey 70/10, 80/12 | Glitter stretch tulle |
| Faux leather | Microtex 70/10–90/14 or Leather 70/10–100/16 | Soft faux leather stretch |
| Polyester | Universal or Microtex 60/8–100/16 | Matte polyester crepe |
| Polyester, stretch | Stretch 75/11, 90/14 | stretch polyester/spandex fabrics |
| Rayon | Universal 70/10, 80/12 | viscose-rayon fabrics |
| Jacquard | Universal 80/12–100/16 | Tonal viscose jacquard |
| Tencel | Microtex, Jeans/Denim or Universal, 70/10 | Lyocell-viscose jacquard |
Notes on the chart: SCHMETZ lists categories by fabric type, not by individual product; the HIBA column is our matching by fibre and construction, so confirm on a swatch. Where two SCHMETZ rows overlap for one fabric (viscose jacquard sits between "Rayon 70/10–80/12" and "Jacquard 80/12–100/16"), 80/12 is the shared size — a sensible first test. For a semi-sheer lightweight jacquard, start finer (70/10).
Troubleshooting by symptom
| Symptom | Likely needle-related cause | What to try |
|---|---|---|
| Pulled threads or snags on satin | Blunt or too-thick needle | New Microtex 60/8–70/10; selfmade advises starting satin projects with a fresh needle and changing mid-project if snagging begins |
| Skipped stitches on stretch (tulle, spandex blends, sequin stretch) | Needle not suited to elastic fabric | Switch to a Stretch needle 75/11 or 90/14 (SCHMETZ) |
| Puckering on chiffon | Needle too large/blunt, hole in the plate too wide, heavy thread | Finer Microtex; see Article 4 for plate/thread advice |
| Drag or skipping on faux leather | Wrong needle/foot for the coated face | Microtex or Leather needle in the range above; test a scrap — see HIBA's faux leather product page, which advises testing the foot and using clips rather than visible pins |
| Needle breaks on dense fabric | Too fine for the weight | Step up a size within SCHMETZ's range |
Before you sew the real garment
- Test needle, thread and stitch on an offcut — most HIBA product pages tell you the same.
- Use a new needle per project, and again if you hear popping or see snags (Threads magazine: "You shouldn't hear popping sounds as the needle moves through the textile").
- Choose pattern, lining and seam finishes for the fabric: read how to sew viscose jacquard, the sheer overlay layering guide and what to check before ordering fabric by the metre.
Browse satin fabrics, metallic and foil fabrics and faux leather fabrics.
Sources
- SCHMETZ, "Microtex Needle" (manufacturer product page) — https://www.schmetz.com/en/household-needles/products/single-needles/microtex-needle/
- SCHMETZneedles, "Needles by Fabric Type" (manufacturer chart) — https://www.schmetzneedles.com/pages/needles-by-fabric-type
- selfmade, "9 tips for sewing in satin fabric" (retailer guide) — https://www.selfmade.com/en-gb/inspiration/ideas-for-sewing-projects/9-tips-for-sewing-in-satin-fabric/
- Threads, "Sewing with Silk: Tools and Supplies for Sewing Silk", 12 May 2022 — https://www.threadsmagazine.com/2022/05/12/sewing-with-silk-tools-and-supplies-for-sewing-silk
- HIBA Fabrics product pages (care/sewing notes) — linked above.